Edelbrock Mustang Supercharger

Serious Bolt-On Power Gains

Performance enthusiasts love to add aftermarket parts to their cars and trucks to push their vehicles well past stock power ratings. Our goal with these upgrades is to add a few points of horsepower and torque for each part so that when we’re done (the half-truth we tell our spouse) we’ve improved the stock engine in a noticeable way.
edelbrock e-force supercharger ford mustang
But every now and then, we add a product that simply hits a home-run in one quick hit. If you’re looking to add another 100 horspower and over 100 ft-lbs of torque, the Edelbrock E-Force Supercharger kits are your answer.

 

Quick Intro to E-Force Kits for Mustangs

Edelbrock E-Force Supercharger systems deliver excellent horsepower and torque in a complete kit. Featuring a unique design with minimal components. It makes it possible to fit an E-Force Supercharger under the stock hood. And if you opt for the Stage 1 Street Systems, you’ll be good with the emission authorities as the kits are 50-State Street Legal.

 

Prooven Power Gains

The core of each system is the Eaton Gen VI 2300 or 1320 TVS® Supercharger rotating assembly with a four lobe design with 160° of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. Edelbrock also designed the E-Force superchargers with a unique and efficient inlet configuration. This design results in a shorter, less restrictive intake path for improved air flow, without the need for a jack-shaft. Keeping the air cool is a high capacity air to water intercooler and low temp heat exchanger.

Here is a dyno-run documented by RDP Motorsport. Their 2016 Mustang with the E-Force made 523.7 HP. The stock 5.0L is rated at 435 HP.

 

Three Performance Levels

Edelbrock supercharger systems are available in three performance levels for Mustangs:
Stage 1: These systems are emissions legal and provide the best combination for your daily driver. They will also include a tune for both 91 and 93 octane, on select applications.

Stage 2: These systems include the components from the Stage 1 system with the addition of a cold air intake (if required), smaller pulley, fuel injectors (if required), fuel pump (if required) and a custom tune, giving you great performance for the track. These systems are for competition racing only. Here is a video detailing a 2013 Mustang using a Stage 2 kit:

Stage 3: These Professional Tuner systems include all of the essential components that a racer would need to build a custom supercharged racing setup. They offer flexibility in pulley selection, cold air intake and more. These systems are for competition racing use only.

Video of the kits being assembled at the Edelbrock factory:

 

Complete Kits

Your new E-Force kit will arrive on a mini-pallet with several boxes of parts and installation accessories. When Edelbrock says “complete”, they are not kidding. Here is a great unboxing video from Hot Rod where they go through all the parts and accessories you’ll receive:

 

Installation in Your Garage

We were surprised to learn the average garage DIY’er can install an Edelbrock E-Force Supercharger. Visit this page on the Edelbrock site to download the installation guide for your model. Here is a quick video from Engine Power host Mike Galley where he shows that you can install an E-Force kit with standard tools and without the need for a lift kit:

Here is a great video from eBay Motors modJOBS1 installing an E-Force on their 2012 Mustang:

 

Learn More

Visit this PAGE to read more details about the Eelbrock Mustang E-Force Supercharger kits. Or call the Edelbrock Tech Line at 800-416-8628

COMPANY DETAILS

Edelbrock logo

Company

Edelbrock

Website

edelbrock.com

Connect:

Email

tech@edelbrock.com

Phone

(800) 416-8628

Address

2700 California Street

Torrance, CA 90503

ABOUT Edelbrock Corp®

Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation’s premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet. For more information, visit www.edelbrock.com

COMPANY VIDEO